Main Devices for full set of DB140 warping machine:
1. Warper head 7. Eyelet board
2. Tensioner roller 8. Drop-pin stop motion
3. Oiling device 9. Turn table Creel
4. Antistatic device 10. Trolley
5. Yarn storage
6. Fluff detector
Main Technical Parameters:
1. Beam size: 30″x21″, 40″x21″ and 42″x21″.
2. Speed: 50-1000 m/min.
3. Main Motor: 11kw AC-frequency.
4. Beam up and down,clamping and brake: pneumatic.
5. Braking distance: ≤5m at 900m/min
6. Air pressure: ≥6kgs/cm2.
7. Yarn storage: 10mtr.
8. Maximum counting range: 200,000 meters (circles).
9. Power: 380V, 3phases, 50Hz.
1. According to original beam,copying sets of same beams .
2. The micro-computer real-time monitoring system can detect beam’s diameters in succession and regulate the tension at all time to make sure that diameters, out perimeter and length of a set of beams are equal.
3. The tension roller is fixed on the tension roller, PID AC frequency adjusts yarn tension.
4. The machine can give an alarm when it is in errors and calculation precision is high.
5. Revising warping parameter on line. Mother beam can revise warping length and sub-beam can revise outer perimeter and length.
6. The beam’s load and unload is driven pneumatically and rises and falls in straight line so it runs steadily and orientates accuratel.
7. Main shaft brakes pneumatically. Roller adopts electric break.
8. Operation is easy and can simulate the beams group.
Product Name: DB140 high speed warping machine. GE118 DIBA, SAIJIA SGZ330Z